≡
Difference between revisions of "A13-OLinuXino"
(→Software) |
(→Projects) |
||
| Line 27: | Line 27: | ||
ANDROID PROJECTS: | ANDROID PROJECTS: | ||
| − | + | [http://olimex.wordpress.com/2012/10/24/a13-olinuxino-project-control-relays-and-read-adcs-and-ios-with-android/ Interface MOD-IO board with I2C under Android ] | |
LINUX PROJECTS: | LINUX PROJECTS: | ||
| − | + | [http://olimex.wordpress.com/2012/10/23/a13-olinuxino-playing-with-gpios/ GPIOs ] | |
== FAQ == | == FAQ == | ||
Revision as of 07:01, 2 November 2012
Contents
Documents
Under construction
Hardware
Under construction
Software
Building bootable Debian SD card for A13-OLinuXino
Andoroid 4.0.3 NAND flash prebuild image for LCD 800x480 resolution
LiveSuit for loading images to the NAND flash; to activate A13 bootloader do as follows: run Livesuit, disconnect the power supply and USB cable, then press HOME button, apply power supply, attach USB cable and release the button, Livesuit will detect the bootloader and will ask which file to program to the NAND flash.
Projects
ANDROID PROJECTS:
Interface MOD-IO board with I2C under Android
LINUX PROJECTS:
FAQ
Under construction
- Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted.
